The Safety in grinding wheel using

The Safety in grinding wheel using

before use:

1. Before starting the machine, check the machine guards and various operations of the reset switch is adjusted position and firmly.

2, the use of shields, should be covering at least half the wheel diameter.

3, wheel mounted on the grinding machine spindle, you must be idle, idle time is less than 5 minutes, and when idling, the operator shall stand in a safe location, or forbidden to stand in front of a tangential direction of the wheel.

when using it:

1, with the outer peripheral surface of the wheel face to do, do not use the side for grinding, grinding wheel in order to avoid fragmentation.

2, during grinding, prohibit the use of lever pressing the workpiece to increase the pressure on the wheel.

3, or grinding wheel dressing, the amount of feed should be appropriate, and the use of specialized tools dressing wheel dressing. And should wear protective equipment.

4, the front wheel stops turning the coolant should be shut down, continue to rotate the wheel to do grinding fluid thrown up, so as not to affect the balance of the performance wheel.

5, prohibits the use of binding agents are damaged wheel grinding fluid. Not allowed to use the local coolant temperature is below 0 degrees Celsius.

http://www.jcabrasive.com/news/14.html