Vibration is the enemy of dressing

In the wheel dressing, and effectively reduce vibration and avoid dressing in grinding wheel surface leaving traces of collision and damage repair tools, it is essential. This means that you must also maintain a balance wheel, which is the wheel itself, the structural characteristics of the decision. Density unevenness and the entire wheel geometry is good or bad, will affect the natural balance of a wheel. So choose a high-quality grinding wheel is also very important. If it is a high quality grinding wheel, just proper installation that is able to maintain a good balance wheel. Grinding wheel according to the manufacturer's instructions factory, are marked with an arrow up on the wheel, it shows the balance wheel after crude light end position. The user can then noted in the arrow directions, wheel dressing attention to dynamic equilibrium. Coolant uniformly filling, and sometimes can also help maintain a balance wheel.

In order to prevent vibrations as much as possible, the operator must make the dressing tool clamped in strong clip seat and leave the minimum amount of overhang, the only way to make the dressing tool strong enough rigidity. If diamond tools are not firmly clamped in the finishing process, it will inevitably cause vibration, resulting in severe noise, the surface of the part produce small ripples, resulting in parts of the surface strain on the dresser and cause some damage.