Resin grinding wheel cleaning method
    In the production process to use diamond grinding wheel grinding in the belt. General grinding wheel running 5-7 days to remove the cleaning. (Rubbed down above the rubber debris, after high temperature friction attached to the surface of the diamond, it is difficult to clean)
    Now we use acetone soak 2 hours, and then use imported cleaning agent cleaning, the effect is very good, but not environmental protection, energy saving.
    Cleaning requirements:
    1, to be environmentally friendly, non-ketone, can not be halogenated hydrocarbons.
    2, can not damage the diamond wheel tablets
    Installation Notes
    Grinding wheel in the installation must be carefully examined and identified before. Check the identification of the steps are:
    1, check whether the brand wheel is correct, in line with the performance of all selected grinding wheel, shape and size.
    2, check and identify the appearance of the wheel structure. Look at the wheel to see if it is damaged (or cracked). The appearance of damage (or cracks) of the wheel can not be used. There are also requirements both sides of grinding wheel flat, no obvious skew.
    3, check and identify the internal cracks in the grinding wheel. With a hand wheel, with a wooden hammer tapping wheel tablets listen to the sound, no crack of the grinding wheel issued a crisp sound, cracked wheels are hoarse voice, which can not be used.