Vibration is an enemy of finishing

In grinding wheel dressing, effectively reduce the vibration, to avoid the grinding wheel surface traces of finishing, collisions and damage repair tools, etc, is crucial. This means that also must be a balance of grinding wheel, which is decided by the structure characteristics of the grinding wheel itself. The stand or fall of uneven density and the wheel geometry, will affect the natural balance of a grinding wheel. So choose a high quality of the grinding wheel is also very important. If is a high quality of the grinding wheel, the proper installation which can keep balance of grinding wheel is very good. According to the grinding wheel manufacturer factory instructions, grinding wheel with an up arrow, which shows the light while the wheel after rough balance. Root tree arrows, then the user can pay attention to dressing grinding wheel, make its reach dynamic equilibrium. Cooling fluid filling evenly, sometimes can also help the wheel balance.

As much as possible in order to prevent vibration, the operator will make dressing tools strong ground clamp on the holder and have the smallest trailer, only in this way can make the dressing tool has a strong enough rigidity. If the diamond tool in the process of finishing not firm clamping, hard to avoid can cause serious noise, vibration, make the surface of the parts produced tiny ripples, the surface strain of the parts and cause some damage for dressing tools.